We have been working on the Cottonwood Modern project for a while now with most of the work focusing on running electrical and plumbing, putting in the fire sprinklers, and setting the recessed lighting. While this sort of thing (believe it or not) is very exciting for the homeowners, it doesn’t make for exciting updates – not unless you are super technical and really enjoy seeing how electrical wiring gets terminated at the electric panels.
That’s what I thought.
That’s why today – after a bit of a hiatus – I am going to show some of the work that is going on with a metal trellis we designed into the project. The good news is that it’s turning out just like we planned.
.
Just as a quick hey-o, these are the contractors that are working to make this house all that is can be – Barry Buford (contractor on the left) and Bruce Baughman (site superintendent on the right). These guys are crucial to getting the level of detail right on the project. I said it before but it bears repeating – even though a contractor is only as good as their worst subcontractor, it’s the contractor sets the tone of the project. If you don’t have good people at the top, you’ve got no chance for a good project at the end.
.
Okay, so I’m going to get a little technical on you – thought it might be interesting to include one of the wall sections at the metal trellis. There are another 10 or so details associated with this trellis but I am going to keep it high level and just present an overview.
.
We have overhangs that wrap around each of the cantilevered rooms on the back of this project – and each have steel in them to make that overhang work. This trellis is spanning between two of the cantilevered boxes and provides some solar protection to the dining room and study. In the picture above, on the right hand side, you can see where the front edge of the metal trellis will attach to the overhang. There is a slight gap in place, we wanted to accentuate the overhang from the trellis but this space will eventually be filled in by a box gutter.
.
This is a close up look at the louvers that will make up the actual slats of the trellis. Eventually all of this steel will be painted to match the color of the metal roof.
.
In this picture, the welders are putting up protection between the areas they are working and the finished windows that are already in place.
.
This is a look at the other side of the trellis where it connects into the overhang. In this picture, the welders have attached some of the metal louvers so it should be a little easier to visualize how this trellis will look once it’s completed.
.
Looking down on the steel trellis from above. Really I just took this picture because a) I wanted to climb out on the roof, and b) I thought the idea that sitting on a few 2×8’s is the “comfortable” option for this project.
My back hurts just looking at this picture.
.
Wrapping it all up is a photo from the ground looking back towards (and up at) the trellis. Almost the entire wall below this trellis is 10′-0″ tall windows – you just can’t tell because the protection the welders have put in place.
I am happy that all the time we spent working out the connection details, solar angles, spacing of the metal pieces – all that technical stuff – will result in an extremely simple looking shading device.
Cheers –
.
.